Fujitsu ETERNUS DX100 S3 - Page 635

Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
635
The main setting item is as follows.
● Remote Device Information
• Checkboxes for selecting a remote storage system
2 Click the [Next >>] button
 A confirmation screen appears.
3 Click the [OK] button.
 Measurement of the round trip time starts. After measurement completes, the [Measure Round Trip
Time Result] screen appears.
4 Check the measured round trip time, and click the [Next >>] button.
 A confirmation screen appears.
5 Click the [OK] button.
 Setting of the round trip time starts. After completing the settings, the [Finish Display] screen
appears. Proceed to "Finish" (page 636)
.
End of procedure
If there are no remote storage systems that can measure the round trip time or when the connection
type for all of the copy paths is "Direct", the [Finish Display] screen appears. Proceed to "Finish" (page
636).