Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
638
The procedure to export the copy path information is as follows:
1 Click [Export All Copy Path] in [Action].
2 Click the [Export] button.
The copy path information, which has been registered in the ETERNUS DX, is exported.
After the copy path information export has been finished, a screen to execute downloading the file
is displayed.
3 Click the [Download] button.
A dialog box to download the file appears.
If the copy path information has not been registered in the ETERNUS DX, an error screen appears. If
this occurs, check the parameter settings.
To Next Page
Loading...
