Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
647
2 Specify the REC Disk Buffer detailed information.
The main setting items are as follows.
● New RAID Group
• Name
3 Select drives from the list or the installation image.
■ When selecting drives from the list
Click the [Tabular] tab to select drives from the list.
Only unused drives are displayed on the list.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The RAID group name specified in the "Name" filed does not satisfy the input conditions
To Next Page
Loading...
