Fujitsu ETERNUS DX100 S3 - Page 681

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
681
• UPS Shutdown Signal
Description When enabling the UPS shutdown signal, select the "Enable" checkbox. Also, select the
signal logic for UPS shutdown signal.
To disable this item, clear the "Enable" checkbox.
Input condition/
Display contents
"Enable" checkbox
• Selected
Enables the UPS shutdown signal.
- Positive
Positive logic
- Negative
Negative logic
• Cleared
Disables the UPS shutdown signal.