Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
684
Available EXCP memory size
● Extreme Cache Memory Size Settings (when "Extreme Cache" is selected)
• New Memory Size
Model RAID group configuration
SSD capacity
400GB 800GB 1600GB
ETERNUS DX100 S3/DX200 S3 RAID0 (1D) 400GB 400GB 400GB
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8700 S3/DX8900 S3
RAID0 (1D) 400GB 800GB 1600GB
RAID0 (2D) 800GB 1600GB 1600GB
RAID0 (3D) 1200GB 1600GB 1600GB
RAID0 (4D) 1600GB 1600GB 1600GB
For the ETERNUS DX500 S3/DX600 S3, set the memory size of EXC.
Description Input the EXC capacity that is to be set for the ETERNUS DX.
Input condition/
Display contents
• 0GB - Maximum available memory size (unit: 100GB)
• Numeric characters
Assume that "1TB = 1000GB" and input the EXC memory size. Do not assume that "1TB = 1024GB".
To change the EXC memory size, enter the EXC memory size per ETERNUS DX in the "New memory Size" field.
For the "Current Memory Size" field, memory size that is currently set in the ETERNUS DX is displayed. For the "Max-
imum Available Memory Size" field, the maximum EXC memory size that can be set for the ETERNUS DX is dis-
played. If the PFM capacity in each CM does not match, the total capacity of the smallest capacity (the smallest PFM
capacity x the number of CMs) is displayed as the maximum available memory size.
To Next Page
Loading...
