Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
686
● Select Drives ([Graphic] Tab)
• DE selection list box
• Checkbox to select drives
Description Select the DE group.
The following DE groups are displayed as options in the list box.
• For the ETERNUS DX8700 S3/DX8900 S3, the DE groups that are connected to the CE
with the CM where the EXCP memory size to be set
• For the other models, the DE group with a CE or a DE that is installed in the ETERNUS
DX
Refer to "Options and DE groups for each model" (page 908)
for details.
Input condition/
Display contents
• DE#0x
• DE#1x
• DE#2x
• DE#3x
• DE#4x
• DE#5x
• DE#6x
• DE#7x
• DE#8x
• DE#9x
• DE#Ax
• DE#Bx
Description Select the checkbox for the drive to be used.
Checkboxes are displayed for unused drives. For 2.5" DEs, drives are displayed from left
to right in ascending order of the slot number. For 3.5" DEs or 3.5" high density DEs,
drives are displayed from bottom left to top right in ascending order of the slot number.
Placing the mouse pointer on the icon displays the detailed information of the drive.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
To Next Page
Loading...
