Fujitsu ETERNUS DX100 S3 - Page 693

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
693
A.1.5.2 Create Eco-mode Schedule
For details about this function, refer to "1.6.2 Create Eco-mode Schedule" (page 76).
For the factory default settings for this function, refer to "Appendix B Create Eco-mode Schedule" (page 976)
.
● Set Event
• Event Type
Description Select the event type.
The settings vary depending on the event type.
Input condition/
Display contents
• everyday
Select this to add or edit the daily schedule.
When "everyday" is selected, enter the start time ("From Time") and the end time
("To Time").
If the "From Time" is later than the "To Time", the end time is treated as the next day.
- From Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
- To Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
• Every week
Select this to add or edit the weekly schedule.
When "Every week" is selected, enter the term ("Period"), the start time ("From
Time"), and the end time ("To Time").
If the "From Time" is later than the "To Time", the end time is treated as the next day.
- Period (start day): Monday - Sunday
- Period (end day): Monday - Sunday
- From Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
- To Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
• Specific days
Select this to add or edit the schedule based on specific days.
When "Specific days" is selected, enter the month ("Month"), the term ("Period"), the
start time ("From Time"), and the end time ("To Time").
If the "From Time" is later than the "To Time", the end time is treated as the next day.
- Month: Every Month, January - December
- Period (start date): 01 - 31
- Period (term): One day only, 2 days - 7 days
- From Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
- To Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
• Specific week
Select this to add or edit the schedule based on a specific week.
When "Specific week" is selected, enter the month ("Month"), the term ("Period"), the
start time ("From Time"), and the end time ("To Time").
If the "From Time" is later than the "To Time", the end time is treated as the next day.
- Month: Every Month, January - December
- Period (nth week): 1st - 4th, Last
- Period (start day): Monday - Sunday
- Period (end day): Monday - Sunday
- From Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)
- To Time: 00:00 - 23:30 (can be specified at intervals of 30 minutes)