Fujitsu ETERNUS DX100 S3 - Page 697

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
697
• Password
• Confirm New Password
• Role
• Account
• SSH Public Key
Description Input a new password.
Entered letters are case-sensitive.
Input condition/
Display contents
4 - 64 alphanumeric characters and symbols ('!', '"', '#', '$', '%', '&', ''', '(', ')', '*', '+', ',', '-', '.',
'/', '@', '[', '\', ']', '^', '_', '`', '{', '|', '}', '~', ':', ';', '<', '=', '>', '?')
Description Input the same character string as the value entered in the "New Password" field for
confirmation.
Input condition/
Display contents
4 - 64 alphanumeric characters and symbols ('!', '"', '#', '$', '%', '&', ''', '(', ')', '*', '+', ',', '-', '.',
'/', '@', '[', '\', ']', '^', '_', '`', '{', '|', '}', '~', ':', ';', '<', '=', '>', '?')
Description Select the user role to be assigned to the user ID.
The default and custom roles registered in the ETERNUS DX are displayed as the options.
Input condition/
Display contents
• Monitor
• Admin
• StorageAdmin
• AccountAdmin
• SecurityAdmin
• Maintainer
• Software
• Custom role
Description Select whether to "Enable" or "Disable" the user account.
If the user account is disabled, that user account is registered but cannot be used.
Input condition/
Display contents
• Enable
• Disable
Description Register the SSH client public key used for login authentication from ETERNUS CLI in the
ETERNUS DX.
Click the [Browse...] button and specify the public key to be registered.
When using the SSH client key authentication, register the SSH public key in the
ETERNUS DX and prepare the SSH secret key, corresponding to the public key in the client
PC in advance.
Input condition/
Display contents
Click the [Browse...] button and specify the public key to be registered.