EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Page 707

Fujitsu ETERNUS DX100 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
707
Length of Subnet Prefix
Gateway
DNS
Primary DNS
Secondary DNS
Description Input the prefix length of the connect IP address (unit: bit).
"Length of Subnet Prefix" corresponds to "Subnet Mask" for IPv4.
Refer to "Available IPv6 Address" (page 107)
for details.
Input condition/
Display contents
Numeric characters
3 - 128
Description Input the IP address of the gateway.
The following IPv6 addresses can be used; "link local address", "global address", "unique
local address", or "6to4 address". Refer to "Available IPv6 Address" (page 107)
for
details.
Note that the current setting is displayed by an abbreviation.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation (Setup Network Environment)" (page 107)
for details.
Description Input the IP address of the Primary DNS server that is used for the management LAN.
"Global address", "unique local address", or "6to4 address" can be input for the IPv6
address. Refer to "Available IPv6 Address" (page 107)
for details.
Note that the current setting is displayed by an abbreviation.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation (Setup Network Environment)" (page 107)
for details.
Description Input the IP address of the Secondary DNS server that is used for the management LAN.
The Secondary DNS server must be specified after the Primary DNS server.
"Global address", "unique local address", or "6to4 address" can be input for the IPv6
address. Refer to "Available IPv6 Address" (page 107)
for details.
Note that the current setting is displayed by an abbreviation.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation (Setup Network Environment)" (page 107)
for details.

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals