Fujitsu ETERNUS DX100 S3 - Page 748

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
748
Selected: Notify
Cleared: Not notify
Selected (fixed): Always notify (This setting cannot be changed with this function.)
–: Not applicable to notification
*1: Host Sense Key Code Qualifier is not notified when pinned data disappears.
Informational
Remote Path Recovery – Cleared Cleared Cleared Cleared Cleared
No Free Space on ODX
Buffer Volume
– Cleared Cleared Cleared – Cleared
SED Network Error
Recovered
– Selected Selected Cleared – –
FC CA Port Link Status
Changed
– Cleared Cleared Cleared – Cleared
Host Login Over – Cleared Cleared Cleared – Cleared
NAS Connection Status – Cleared Cleared Cleared – Cleared
Out of NAS Capacity – Cleared Cleared Cleared – Cleared
Out of NAS File
Management Domain
– Cleared Cleared Cleared – Cleared
Succeed NAS Snapshot – Selected Cleared Cleared – Cleared
Fall below NAS Quota
Limit
– Selected Cleared Cleared – Cleared
Automatic Change Storage
Cluster Active/Standby
State
– Selected Selected Cleared Selected Selected
Manual Change Storage
Cluster Active/Standby
State
– Selected Cleared Cleared Cleared Cleared
Connect Storage Cluster
Controller
– Selected Cleared Cleared Cleared Cleared
Virus Scan Server
Connection Recovered
– Selected Selected Cleared – –
Virus Pattern File Update – Selected Selected Cleared – –
Virus Scan Engine Update – Selected Selected Cleared – –
Level Event Notification method
Host Sense
Key Code
Qualifier
SNMP Trap E-Mail syslog REMCS AIS
Connect