Fujitsu ETERNUS DX100 S3 - Page 770

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
770
● SMTP Server
• SMTP Server (required)
• Port No. (required)
• Sender E-Mail Address (required)
• SMTP over SSL
● SMTP Authentication Information
• Authentication Type
• Authentication Method
Description Input the IP address or the domain name of the SMTP server that is used for REMCS
operation.
Input condition/
Display contents
Up to 63 alphanumeric characters and symbols (except space)
Description Input the port number used by the SMTP server.
Input condition/
Display contents
• Numeric characters
• 0 - 65535
Description Input the sender E-Mail address of mails sent by the ETERNUS DX for REMCS operations.
Input condition/
Display contents
Up to 63 alphanumeric characters and symbols (except space)
Description Select the SMTP over SSL method.
Input condition/
Display contents
• None
• STARTTLS
• SSL/TLS
Description Select the SMTP authentication type.
Input condition/
Display contents
• No SMTP Authentication
• POP Before SMTP Authentication
• AUTH SMTP Authentication
Description When "AUTH SMTP Authentication" is selected for "Authentication Type", specify the
SMTP authentication method.
Input condition/
Display contents
• Automatic
• CRAM-MD5
• PLAIN
• LOGIN