Fujitsu ETERNUS DX100 S3 - Page 772

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
772
● REMCS Center
• REMCS Center (required)
● Detailed Configuration Information
● Result Notification Information
● Time Information
Description Select the REMCS center (in each country) where the ETERNUS DX is connected.
Input condition/
Display contents
• *Blank
• Fujitsu America
• Australia
• Brazil
• Hong-Kong
• China
• Indonesia
• Korea
• Malaysia
• Philippine
• Singapore
• Taiwan
• Thailand
• Vietnam
• Individual support in Hawaii
• OSC
• Direct Input Setting
If "Direct Input Setting" is displayed, the center cannot be changed to another location.
For setting items, refer to Step 2
in "1.13.2 Setup Remote Support" (page 193).
For setting items, refer to Step 2
in "1.13.2 Setup Remote Support" (page 193).
For setting items, refer to Step 2 in "1.13.2 Setup Remote Support" (page 193).