Fujitsu ETERNUS DX100 S3 - Page 829

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
829
● Host Setting
• SAS Address
A.4.2.7 Add FC/FCoE Host
For details about this function, refer to "4.2.9 Add FC/FCoE Host" (page 405).
For the factory default settings for this function, refer to "Appendix B Add FC/FCoE Host" (page 993)
.
■ When registering a host by selecting from the host list
● Host Setting
• Checkbox to select a host
• Name
• Host Response
Description Input the SAS address for the SAS host.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
Description Select the checkbox of the FC host that is to be registered in the ETERNUS DX.
The host name and host response can only be specified for the selected FC host.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Input the name for the FC host.
Input condition/
Display contents
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces
Description Select a host response to be assigned to an FC host.
The host response list created in the ETERNUS DX is displayed.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default