Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
838
A.4.2.12 Modify SAS Host
For details about this function, refer to "4.2.17 Modify SAS Host" (page 427).
● SAS Host Setting
• Name
• SAS Address
• Host Response
Description Specify a new SAS host name.
An existing host name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify a new SAS address.
The registered SAS address cannot be used.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
Description Select a new host response that is to be assigned to the SAS host.
The host response list created in the ETERNUS DX is displayed.
This item is available only when a SAS host is not registered in the host group.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default
To Next Page
Loading...
