Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
847
• WWN (Port Name)
• WWN (Node Name)
● Destination
• Checkbox to select copy destination port
Description When Storage Migration is performed, the ETERNUS DX (destination device) is regarded
as a server connecting to the migration source device. Specify the World Wide Port Name
(WWPN) for the server that was connected to the FC-CA port of the migration source
device.
The default "WWN (Port Name)" is displayed with parentheses on the right side of the
[Default] button. Click the [Default] button to set the default value.
Input condition/
Display contents
WWPN (16-digit hexadecimal)
• This item is displayed only when the port mode is "Initiator".
• Specifying the WWPN of the server is only required when the host affinity setting is configured between the
server and a migration source FC-CA port.
If LUN mapping is configured for a migration source FC-CA port, the default value does not need to be changed.
Description When Storage Migration is performed, the ETERNUS DX (destination device) is regarded
as a server connecting to the migration source device. Specify the World Wide Node
Name (WWNN) for the server that was connected to the FC-CA port of the migration
source device.
The default "WWN (Node Name)" is displayed with parentheses on the right side of the
[Default] button. Click the [Default] button to set the default value.
Input condition/
Display contents
WWNN (16-digit hexadecimal)
• This item is displayed only when the port mode is "Initiator".
• Specifying the WWNN of the server is only required when the host affinity setting is configured between the
server and a migration source FC-CA port.
If LUN mapping is configured for a migration source FC-CA port, the default value does not need to be changed.
Description Select the checkbox of the copy destination port.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
To Next Page
Loading...
