Fujitsu ETERNUS DX100 S3 - Page 849

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
849
• TCP/IP Settings
- IP Version
- IP Address
- Subnet Mask
- Gateway
Description Select the IP address version for the target port.
Input condition/
Display contents
• IPv4
Specify the IPv4 address. When "IPv4" is selected, input "IP Address" (required),
"Subnet Mask" (required), and "Gateway".
• IPv6
Specify the IPv6 address. When "IPv6" is selected, input "IPv6 Connect ID Address"
(required), "IPv6 Global Address", and "IPv6 Gateway".
• IPv4/IPv6
Specify both the IPv4 address and the IPv6 address. The input items for IPv4 and
IPv6 can be specified.
This item is not displayed when the port type is "iSCSI RA (for older storage system connection)".
Description Input the IPv4 address of the target port (required when "IPv4" is selected).
Click the [Test Connection (ping)] button to display the [Send ping] screen. Specify
the IP address to check the connection status of the connection remote storage
system and the number of transmissions. Click the [Send] button. When the "ping"
command is sent, the settings of the IP address and the connection path for the
remote storage system can be checked.
Input condition/
Display contents
• Up to 3 numeric characters
• First text box: "1" - "255"
• Other text boxes: "0" - "255"
Description Input the subnet mask of the target port (required when "IPv4" is selected).
Input condition/
Display contents
• Up to 3 numeric characters
• 255.0.0.0 - 255.255.255.252
Description Input the gateway IP address of the target port when "IPv4" is selected.
Input condition/
Display contents
• Up to 3 numeric characters
• All text boxes: "0" - "255"