Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
884
• Group
• SMB Encryption of Data Access
• Access Based Enumeration
Description Input the group of the shared folder.
Input condition/
Display contents
Up to 255 alphanumeric characters and symbols (0x20 - 0x7E in the US-ASCII format)
Note that the following symbols and characters cannot be used.
• Question mark (0x3F) and backslash (0x5C)
• The following reserved words
"shareuser$", "bin", "daemon", "sys", "adm", "tty", "disk", "lp", "mem", "kmem",
"wheel", "mail", "uucp", "man", "games", "gopher", "video", "dip", "ftp", "lock", "audio",
"nobody", "users", "utmp", "utempter", "floppy", "vcsa", "rpc", "nscd", "cdrom", "tape",
"dialout", "ntp", "saslauth", "mailnull", "smmsp", "rpcuser", "nfsnobody", "sshd",
"ldap", "tcpdump", and "oprofile"
Description When performing SMB encryption for data while accessing the shared folder, select
"Enable". When not encrypting, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
Input condition/
Display contents
• Enable
• Disable
• If a client does not support SMB3.0 or SMB3.1, accessing a shared folder where "Enable" is selected for "SMB
Encryption of Data Access" is not available.
• Note that the system performance may be reduced when "Enable" is selected for this item.
Description To hide the shared folders and directories that cannot be accessed according to the
access control list (ACL function), select "Enable". To display inaccessible shared folders
and directories, select "Disable".
This setting becomes available when the protocol is "CIFS" or "CIFS/NFS".
Input condition/
Display contents
• Enable
• Disable
To Next Page
Loading...
