Fujitsu ETERNUS DX100 S3 - Page 904

Appendix A Parameter List
A.5 RAID Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
904
● Automatic Setting
• Number of RAID Groups
• Drive Type
Description Input the number of RAID groups that is to be created.
When creating multiple RAID groups at a time, the new RAID groups are named
automatically. Refer to "Naming conventions for creating volumes" (page 1052)
for
details.
Input condition/
Display contents
• For the ETERNUS DX60 S3
1 - 12
• For the ETERNUS DX100 S3
1 - 72
• For the ETERNUS DX200 S3
1 - 132
• For the ETERNUS DX500 S3
1 - 264
• For the ETERNUS DX600 S3
1 - 528
• For the ETERNUS DX8700 S3
1 - 768
• For the ETERNUS DX8900 S3
1 - 2304
• For the ETERNUS DX200F
1 - 12
Description Select the type of drive that configures a RAID group from the list box.
Input condition/
Display contents
• Online
• Nearline
• SSD
• Online SED
• Nearline SED
• SSD SED