Fujitsu ETERNUS DX100 S3 - Page 939

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
939
• Table Size Threshold
● Calculation Parameters
• Total Copy Capacity
• Session Count
Description Specify the threshold for monitoring the used capacity of the copy table (%).
Input condition/
Display contents
1 - 100
• Refer to "How to calculate the copy table size" (page 606) for detailed procedure to calculate the copy table size.
• Refer to "Estimated Advanced Copy Source Capacity" in "FUJITSU Storage ETERNUS DX Configuration Guide (Web
GUI)" for the maximum copy source capacity.
Description
• Restore OPC is not used
Input the total copy capacity (*1) when Restore OPC is not used (unit: GB).
The applicable Advanced Copy types are as follows:
- EC
- REC
- OPC, QuickOPC, SnapOPC, and SnapOPC+ without using Restore OPC
• Restore OPC is used
Input the total copy capacity (*1) for using Restore OPC (unit: GB).
The applicable Advanced Copy types are as follows:
OPC, QuickOPC, SnapOPC, and SnapOPC+ using Restore OPC
*1: For details about the total copy capacity, refer to "Respective total values for "Total
Copy Capacity" and "Sessions"" (page 940).
Input condition/
Display contents
Numeric characters (decimal)
Description
• When Restore OPC is not used
Input the total number of sessions (*1) for not using Restore OPC.
- The applicable Advanced Copy types are as follows:
- EC
- REC
- OPC, QuickOPC, SnapOPC, and SnapOPC+ without using Restore OPC
• When Restore OPC is used
Input the total number of sessions (*1) for using Restore OPC.
The applicable Advanced Copy types are as follows:
OPC, QuickOPC, SnapOPC, and SnapOPC+ using Restore OPC
*1: For details about the total sessions, refer to "Respective total values for "Total Copy
Capacity" and "Sessions"" (page 940).