Fujitsu ETERNUS DX100 S3 - Page 944

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
944
• Check to use as RA
Input condition/
Display contents
• For the ETERNUS DX8100 S2/DX8700 S2
- FC 1-Port
- FC 2-Port
- FC 4-Port
- iSCSI 1-Port
- iSCSI 2-Port
- iSCSI RA (for older storage system connection)
- "-" (hyphen)
• For the ETERNUS DX90
- FC 4-Port
- "-" (hyphen)
• For the ETERNUS DX410/DX440/DX8100/DX8400/DX8700 or for the ETERNUS4000/
ETERNUS8000
- FC 1-Port
- FC 2-Port
- FC 4-Port
- iSCSI-RA 1-Port
- iSCSI-RA 2-Port
- "-" (hyphen)
• For the ETERNUS6000
- FC 2-Port
- FC 4-Port
- "-" (hyphen)
Description Regardless of whether a copy path is applied or not, select all of the RA ports and CA/RA
ports.
The port number is displayed at right side of the checkbox. When "iSCSI RA (for older
storage system connection)", "iSCSI-RA 1-Port", or "iSCSI-RA 2-Port" is selected in the "Port
Type" field, all ports are automatically selected.
This item is displayed when the model is other than ETERNUS6000.
Input condition/
Display contents
• #x: Port number (0 - 3)
• When "FC 1-Port" is selected as the port type (#1, #2 and #3 cannot be selected)
#0
• When "FC 2-Port" is selected as the port type (#2 and #3 cannot be selected)
#0, #1
• When "FC 4-Port" is selected as the port type
#0, #1, #2, #3
• When "iSCSI 1-Port" is selected as the port type (#1 cannot be selected)
#0
• When "iSCSI 2-Port" is selected as the port type
#0, #1
• When "iSCSI-RA" is selected as the port type (All ports are selected)
#0, #1
• When "iSCSI-RA 1-Port" is selected as the port type (#0 is selected)
#0
• When "iSCSI-RA 2-Port" is selected as the port type (All ports are selected)
#0, #1