Fujitsu ETERNUS DX100 S3 - Page 975

Appendix B Factory Default List
B.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
975
■ Setup Exclusive Read Cache
■ Setup Disk Drive Patrol
■ Setup Debug Mode
■ Backup Configuration
■ Start/Stop Performance Monitoring
■ Clear Cache
*1: This item is only displayed when EXC is enabled.
*2: This item is only displayed when EXCP is enabled.
Screen Setting item Default value
Cache Size Settings Exclusive Read Cache 0%
Screen Setting item Default value
Setup Disk Drive Patrol Disk Drive Patrol Enable
Screen Setting item Default value
Master Trace Level Settings Master Trace Level Standard
Level 0x06
Trace Level by Group Level 0x06
Panic Collection Mode Nose and Tail Mode
Screen Setting item Default value
Select Configuration Definition Configuration Definition Data Configuration (Latest)
Select Backup Slot Configuration Definition Data Backup #1
Screen Setting item Default value
Performance Monitoring
(when starting performance
monitoring)
Interval 30 sec.
Screen Setting item Default value
Target Cache Settings Target Cache
• CM
Selected
• Extreme Cache (*1)
Selected
• Extreme Cache Pool (*2)
Selected