Motor Circuit Error
Motor Circuit Error
When a motor circuit error occurs, the [Error] screen on the touch screen displays one of the following codes.
H0:84
H1:80
H2:81
H8:88
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
Lamp Circuit Error
When a lamp circuit error occurs, the [Error] screen on the touch screen displays the following code.
H7:84
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
Troubleshooting
152
To Next Page
Loading...
