Fujitsu fi-7300NX - Connecting to a Wireless Access Point by Selecting One from the List of Wireless Access Points

Connecting to a Wireless Access Point by Selecting One from the List of Wireless
Access Points
1 In the screen for selecting a configuration method, select [Select an Access Point] and press the [Next]
button.
2 Check the setting items and the order of them, and then press the [Start] button.
A list of wireless access points is displayed.
3 Select the wireless access point that you want to connect to, and then press the [Next] button.
4 Enter the information for the wireless access point.
Enter the following:
● Security key
● Authentication Method
● User ID
● Password
● Other necessary information for connecting to a wireless access point
5 After you finish entering the necessary information, press the [Next] button.
When the connecting process is complete, the connection result is displayed.
6 Press the [Next] button.
Specify the following items:
Refer to step 4 in When Connecting the Scanner via Wi-Fi (page 34).
Scanner Setup
37