Sensor Error
Sensor Error
If a sensor error occurs, the [Error] screen on the touch screen displays one of the following codes.
L0:11
L2:13
L6:1B
Take the following measures.
● Clean the ultrasonic sensors and the document sensors by referring to Cleaning the Inside of the Scanner
(ADF) with a Cloth (page 119).
● Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
Troubleshooting
153
To Next Page
Loading...
