Scanning Documents with Different Widths
ATTENTION
When you scan a mixed batch with different widths, some of the narrower documents may be skewed or not fed
into the ADF.
In that case, separate the documents by their widths, and scan them in different batches.
HINT
For details about document requirements for scanning a mixed batch of documents, refer to Conditions for Mixed
Batch Scanning (page 87).
1 Align the top of the documents.
2 Place the documents at the center of the ADF paper chute (feeder), and adjust the side guides to the
widest document in the batch.
Various Ways to Scan
94
To Next Page
Loading...
