ATTENTION
Load all documents above the center of the pick roller. If documents are loaded outside of the pick roller
width, they may be fed skewed or not fed into the ADF.
3 Adjust the stacker to fit the longest document.
For details, refer to Setting Up the Stacker (page 65).
4 In the scanner driver, configure the scan settings to detect the paper size automatically.
For details, refer to the help for the scanner driver.
5 Scan documents with the image scanning application.
For details, refer to the help for the image scanning application.
Various Ways to Scan
95
To Next Page
Loading...
Need help?
General
