Setting Up the Stacker
Documents loaded in the ADF paper chute (feeder) are ejected onto the stacker one by one when scanning starts.
Using the stacker, stacker extension and stopper as described in the following procedure will keep the documents
straight and feed them smoothly.
Document Length Is A6 (Landscape) or Longer
1 Pull out the stacker and stacker extension.
Make sure to pull out the stacker extension all the way.
2 Lift up the stopper.
ATTENTION
Do not lift up the stopper more than 90 degrees, because it may break.
Basic Operations
65
To Next Page
Loading...
