Fujitsu Primepower200 - Page 16

5.3 Preparations for Use ::::::::::::::::::::::::::::::::: 73
5.3.1 Installation notes
::::::::::::::::::::::::::::::: 73
5.3.2 Installation specifications
::::::::::::::::::::::::::: 75
5.3.3 Connecting the console
:::::::::::::::::::::::::::: 76
5.3.4 Turning the power on
::::::::::::::::::::::::::::: 77
5.3.5 Turning the power off
::::::::::::::::::::::::::::: 78
5.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 80
5.3.7 How to enable/disable the break signal
:::::::::::::::::::: 80
5.3.8 LAN expansion note
::::::::::::::::::::::::::::: 81
5.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 82
5.4.1 Adding power supply units
:::::::::::::::::::::::::: 84
5.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 85
5.4.3 Adding memory modules
::::::::::::::::::::::::::: 86
5.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 86
5.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 87
CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server 89
6.1 Overview
:::::::::::::::::::::::::::::::::::::: 90
6.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 91
6.2.1 Front side
::::::::::::::::::::::::::::::::::: 91
6.2.2 Control panel
::::::::::::::::::::::::::::::::: 92
6.2.3 Rear side
::::::::::::::::::::::::::::::::::: 94
6.3 Preparations for Use
::::::::::::::::::::::::::::::::: 96
6.3.1 Installation notes
::::::::::::::::::::::::::::::: 96
6.3.2 Installation specifications
::::::::::::::::::::::::::: 99
6.3.3 Connecting the console
:::::::::::::::::::::::::::: 100
6.3.4 Turning the power on
::::::::::::::::::::::::::::: 101
6.3.5 Turning the power off
::::::::::::::::::::::::::::: 103
iv