Fujitsu Primepower200 - Page 15

CONTENTS
CHAPTER 4 PRIMEPOWER400 Pedestal Server 45
4.1 Overview
:::::::::::::::::::::::::::::::::::::: 46
4.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 47
4.2.1 Front side
::::::::::::::::::::::::::::::::::: 47
4.2.2 Control panel
::::::::::::::::::::::::::::::::: 48
4.2.3 Rear side
::::::::::::::::::::::::::::::::::: 51
4.3 Preparations for Use
::::::::::::::::::::::::::::::::: 52
4.3.1 Installation notes
::::::::::::::::::::::::::::::: 52
4.3.2 Installation specifications
::::::::::::::::::::::::::: 53
4.3.3 Connecting the console
:::::::::::::::::::::::::::: 55
4.3.4 Turning the power on
::::::::::::::::::::::::::::: 55
4.3.5 Turning the power off
::::::::::::::::::::::::::::: 57
4.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 58
4.3.7 How to enable/disable the break signal
:::::::::::::::::::: 59
4.3.8 LAN expansion note
::::::::::::::::::::::::::::: 60
4.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 61
4.4.1 Adding power supply units
:::::::::::::::::::::::::: 62
4.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 63
4.4.3 Adding memory modules
::::::::::::::::::::::::::: 63
4.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 64
4.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 65
CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server 67
5.1 Overview
:::::::::::::::::::::::::::::::::::::: 68
5.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 68
5.2.1 Front side
::::::::::::::::::::::::::::::::::: 69
5.2.2 Control panel
::::::::::::::::::::::::::::::::: 69
5.2.3 Rear side
::::::::::::::::::::::::::::::::::: 72
iii