Fujitsu Primepower200 - Page 14

2.4 Expanding the Server Unit :::::::::::::::::::::::::::::: 20
2.4.1 Adding CPU modules
::::::::::::::::::::::::::::: 21
2.4.2 Adding memory modules
::::::::::::::::::::::::::: 21
2.4.3 Adding hard disk drives
:::::::::::::::::::::::::::: 22
2.4.4 Adding PCI cards
::::::::::::::::::::::::::::::: 24
CHAPTER 3 PRIMEPOWER200 Rackmount (4U) Server 25
3.1 Overview
:::::::::::::::::::::::::::::::::::::: 26
3.2 Names and Functions of Parts
:::::::::::::::::::::::::::: 27
3.2.1 Front side
::::::::::::::::::::::::::::::::::: 27
3.2.2 Control panel
::::::::::::::::::::::::::::::::: 27
3.2.3 Rear side
::::::::::::::::::::::::::::::::::: 30
3.3 Preparations for Use
::::::::::::::::::::::::::::::::: 31
3.3.1 Installation notes
::::::::::::::::::::::::::::::: 31
3.3.2 Installation specifications
::::::::::::::::::::::::::: 33
3.3.3 Connecting the console
:::::::::::::::::::::::::::: 34
3.3.4 Turning the power on
::::::::::::::::::::::::::::: 35
3.3.5 Turning the power off
::::::::::::::::::::::::::::: 37
3.3.6 Installing the Enhanced Support Facility package
::::::::::::::: 38
3.3.7 How to enable/disable the break signal
:::::::::::::::::::: 39
3.3.8 LAN expansion note
::::::::::::::::::::::::::::: 40
3.4 Expanding the Server Unit
:::::::::::::::::::::::::::::: 41
3.4.1 Adding power supply units
:::::::::::::::::::::::::: 42
3.4.2 Adding CPU modules
::::::::::::::::::::::::::::: 42
3.4.3 Adding memory modules
::::::::::::::::::::::::::: 43
3.4.4 Adding hard disk drives
:::::::::::::::::::::::::::: 43
3.4.5 Adding PCI cards
::::::::::::::::::::::::::::::: 44
ii