Fujitsu Primergy RX100 S2 User Manual

255
PRIMERGY RX100 S2 User’s Guide
9
Operation and Maintenance
5 Update drivers.
1. Click [Next] in the [Start Device Driver Upgrade Wizard] window.
The [Install Hardware Device Driver] window appears.
2. In search method selection, select [Display known drivers for this device and select
a driver from the list.] and click [Next].
The [Select a Device Driver] window appears.
3. Select [Show all hardware of this device class]. From the [Manufacturers] list,
select [(Standard computers)]. Select either of the following from [Models].
• [ACPI multi-processor PC] to change the OS to the multi-processor kernel
• [ACPI uni-processor PC] to change the OS to the uni-processor kernel
 If the wrong model is selected, the system does not operate properly. You must reinstall the OS
in some cases. Take great care of changing the OS.
4. Click [Next].
The [Start Device Driver Installation] window appears.
5. Click [Next].
Driver update starts. The [Finish] window appears when it completes.
6. Click [Finish].
The [ACPI Multiprocessor PC Properties] window or [ACPI Uniprocessor PC Properties]
window appears.

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English