Fujitsu Primergy RX100 S2 - Page 256

256
Chapter 9 Operation and Maintenance
6 Shut down and turn off the server.
1. Click [Close].
The [System Settings Change] window appears.
2. Click [Yes].
The computer shuts down and restarts automatically.
7 Add an optional CPU or change the Hyper-Threading setting in the BIOS Setup
Utility.
"8.2.1 Starting and Exiting the BIOS Setup Utility" (pg.191)
"8.2.8 Advanced System Configuration Submenu" (pg.204)
8 Restart the system.
When the OS starts up, check that the item under [Computer] is changed in Device Manager of
Control Panel.