Fujitsu PRIMERGY RX200 S2 User Manual

125
PRIMERGY RX200 S2 User’s Guide
4
Manual OS Installation
■ When a LAN Card is Added
The following window may appear at system startup after addition of a LAN card. Perform the
appropriate procedure according to the displayed window.
• When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and subsequent steps
in "Updating LAN Drivers".
• When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or floppy
disk" or "Intel® PRO/1000 Disk Driver".
Insert the driver disk created from the ServerStart CD-ROM and install the driver.
 The "Digital signature was not found" message may appear. If it appears, click [Yes] to continue the
operations.
 When the [Overwriting the Files] window appears, normally do not overwrite the files (select [Do not
overwrite all files]).
4.3.3 Latest Drivers
The latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server