Fujitsu PRIMERGY RX200 S2 User Manual

238
Chapter 8 Hardware Configuration/Utilities
8.3.3 Boot Adapter List Menu
Configures startups from the SCSI adapter.
Select this menu from the header of the [Main] menu.
table: Items on the Boot Adapter List Menu
Item Setting Description
Boot Order 0 (Fixed parameter) Specifies the boot order for SCSI devices.
Use the [-] and [+] keys to change the order.
Next Boot • ON (at the time of
purchase)
•OFF
Sets whether to enable or disable the SCSI
controller BIOS.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMx.xx.xx
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute<Item>
Boot Adapter List
Insert=Add an adapter Delete=Remove an Adapter
Adapter
1020/1030
PCI
BUS
3
Boot
Order
[0]
Current
Status
On
Next
Boot
[ON]
DEV/
Func
28
Hit Instert To Select an adapter from this list:
<1020/1030 3 28>

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server