Fujitsu PRIMERGY RX200 S2 User Manual

219
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2.8 Advanced System Configuration Submenu
Appears when [Advanced System Configuration] is selected from the [Advanced] menu.
Configures additional settings.
table: Items on the Advanced System Configuration Submenu
Item Setting Description
CPU Settings
[Enter]
Configures the CPUs.
"
■ CPU Settings Submenu" (pg.220)
USB Host 1.1 Controller • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to use the USB host controller
(2.0 or 1.1).
USB Host 2.0 Controller
USB BIOS Legacy Support
• Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable a USB-compatible
keyboard in an MS-DOS environment.
This item can be set when [USB Host 1.1
Controller] is set to [Enabled].
BIOS Work Space Location Top of Base Memory Selects the BIOS work space.
Memory Redundancy Disabled (Fixed parameter) This server cannot use this.
Item Specific Help
PhoenixBIOS Setup Utility
Advanced
CPU Settings:
USB 1.1 Host Controller: [Enabled]
USB 2.0 Host Controller: [Enabled]
USB BIOS Legacy Support: [Enabled]
BIOS Work Space Location: [Top of Base Memory]
Advanced System Configuration
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
Memory Redundancy : [Disabled]

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server