Fujitsu PRIMERGY RX200 S2 - CPU Status Submenu

227
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2.13 CPU Status Submenu
Appears when [CPU Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed CPU.
table: Items on the CPU Status Submenu
Item Setting Description
CPU 0 Status • Enabled (at the time of
purchase)
• Disabled
• Failed
Sets whether or not to allow the use of CPUs
installed in the CPU sockets.
This must not be set to [Disabled] or [Failed].
CPU 1 Status
Item Specific Help
PhoenixBIOS Setup Utility
Server
CPU 0 Status: [Enabled]
CPU Status
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
CPU 1 Status: [Enabled]