Fujitsu PRIMERGY RX200 S2 User Manual

213
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
8.2.4 Boot Options Submenu
Appears when [Boot Options] is selected from the [Main] menu.
Sets system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Enabled (Fixed parameter) Sets whether or not to stop the boot process and
shut down the system, in case a POST (Power On
Self Test) error is detected.
Keyboard Check
• Disabled
• Enabled (at the time of
purchase)
Sets whether or not to check for a keyboard during
POST.
SM Error Halt Disabled (Fixed parameter) Sets the procedure in case an error occurs regarding
the fan or temperature sensor.
Quick Boot
Disabled (Fixed parameter)
Sets whether or not to run POST in short mode.
Quiet Boot Disabled (Fixed parameter) Sets whether or not to display the logo screen
instead of POST information.
Memory Testing
Enabled (Fixed parameter)
Sets whether or not to check the memory during
POST.
Boot Menu Enabled (Fixed parameter)
Sets whether to enable or disable the boot menu.
Boot Sequence [Enter] Sets the order of selected drives to boot the OS.
"
■ Boot Sequence Submenu" (pg.214)
MultiBoot for HDs Enabled (Fixed parameter)
Sets whether or not it is possible to specify the
order of hard disks to boot the OS when multiple
hard disk units are installed.
PhoenixBIOS Setup Utility
Item Specific Help
Main
POST Errors: [Enabled]
Keyboard Check: [Enabled]
SM Error Halt: [Disabled]
Quick Boot: [Disabled]
Quiet Boot: [Disabled]
Memory Testing: [Enabled]
Boot Menu: [Enabled]
Boot Sequence
MultiBoot for HDs: [Enabled]
Boot Options
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server