Fujitsu PRIMERGY RX200 S2

207
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
■ Jumper Settings
The jumper settings are as follows.
S: Setting at the time of purchase
table: Jumper Settings
Jumper Setting Contents
Setting at the
time of
purchase
JP7 1-2 The server starts up with the normal BIOS
information.
S
2-3 The server starts up with the stored BIOS
information.
-
JP9 1-2 The information stored on the CMOS is retained. S
2-3 The information stored on the CMOS is deleted. -
1 2 3