Fujitsu PRIMERGY RX200 S2 User Manual

175
PRIMERGY RX200 S2 User’s Guide
Installing Internal Options
7
7.4.1 Where to Install the Memory Modules
Install memory modules in the memory slots on the baseboard.
One memory bank consists of Slots A and B on this server.
■ Installation Order
Use memory banks in order of bank 1, bank 2, bank 3, and bank 4 in order of larger capacity. Install by a
pair of memory modules having the same capacity in the memory bank.
7.4.2 Installable Memory Modules and Notes
■ Installable Memory Modules
The following memory module types can be used on this server.
■ Contents of the Optional Memory Package
Before installing memory modules, refer to "Appendix B.2 Memory Specifications" (pg.293) to check
the contents of the optional package.
table: List of Installable Memory Modules
Product name Model Remarks
Memory Module-1GB PG-RM1BC 512MB DIMM
× 2
Memory Module-2GB PG-RM2BC 1GB DIMM
× 2
Memory Module-4GB PG-RM4BC 2GB DIMM
× 2
Memory Slot B1
Memory Slot A1
Memory Slot B2
Memory Slot A2
Memory Slot B3
Memory Slot A3
Memory Slot B4
Memory Slot A4
Memory bank1
Memory bank2
Memory bank3
Memory bank4

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server