Fujitsu PRIMERGY RX200 S2 User Manual

43
PRIMERGY RX200 S2 User’s Guide
2
Checking before OS Installation
3 Exit the BIOS Setup Utility and turn off the server.
 You can turn the power on/off from a client (via a LAN) by utilizing the Wakeup on LAN (WOL) function.
This function is enabled at the time of purchase. For more details, refer to "5.5.5 Turning the Power
On/Off via a LAN" (pg.150).
 Be sure to install ServerView to control the power supply via a LAN.
When ServerView is not installed, the server is not turned off automatically after OS shutdown.
■ SCSI Setup Utility
The SCSI Setup Utility is used for setting the onboard SCSI array controller of this server.
Check or change settings as necessary before installation. Refer to "8.3 SCSI Setup Utility" (pg.233).

Fujitsu PRIMERGY RX200 S2 Specifications

General

Chipset	Intel 5000P
Network	Dual Gigabit Ethernet
Operating System Support	Windows Server, Linux
Processor	Intel Xeon processors
Memory Slots	8 x DIMM
RAID Support	RAID 0, 1
Power Supply	Redundant power supply
Form Factor	1U rack server