02–TX150S2–154 July 2004 U41057-J19-Z146-1-76
Fit assembly kit and rack-mount the server Removal/installation routines
Ê Mount the necessary manufacturer original parts (like support angle or cable
management).
Sometimes a number of parts of the delivered mounting kit cannot be
used because original parts of the 3rd-Party rack are to be used.
Ê Mount the supplied four assembly brackets on the telescopic rails as
described in page 02-TX150S2-142.
Ê Mount the assembled telescopic rails with the brackets in the 3rd-Party rack
as described in page 02-TX150S2-142.
Ê Mount the server (see page 02-TX150S2-154).
Ê Route the cables as described in the original manual of the rack.
Installing the server
At least two people are needed to position the server in the rack.
Ê Pull the mounted telescopic bars completely out toward the front. They must
click into place so that you can no longer push them back.
i
!
To Next Page
Loading...
Need help?
General