Fujitsu PRIMERGY TX150 S2 User Manual

02–TX150S2–42 July 2004 U41057-J19-Z146-1-76
Initial operation and operating Installation and initial operation
Activate RemoteView
To be able to start the remote monitoring and diagnostics system RemoteView
automatically, you have to enter the disk parameters in the BIOS setup and boot
one time from the RemoteView medium (chipDISK).
You find the description how to proceed under ’Configuring the chipDISK’ on
page 02-TX150S2-101.
For more details on the operation of RemoteView, please refer to module
"Diagnostics" of the service manual.

Fujitsu PRIMERGY TX150 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S2
Category	Server
Language	English