Fujitsu PRIMERGY TX200 S2 User Manual

107
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart
5 Eject the CD-ROM and floppy disk and click [OK].
The system restarts. When the installation is completed, an installation completion message
appears on the target server.
6 Press any key on the target server.
7 Restart the system on the target server.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" (
pg.133) and perform necessary procedures
before starting server operations.

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English