181
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
7.3 Installing a CPU
The server can have up to two CPUs by adding an optional CPU.
• When installing or removing a CPU, turn off the server, all peripheral devices,
and any other connected devices. Also unplug all power cables from the
outlet.
Failure to do so can cause electric shock.
• Do not install unauthorized third party CPUs. This could damage the server.
• Do not use CPUs that differ in frequency/cache size. The system may become
unable to start up.
• The circuit boards and soldered parts of hardware options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edge of the circuit boards.
To Next Page
Loading...
