Fujitsu PRIMERGY TX200 S2 User Manual

244
Chapter 8 Configuring Hardware and Utilities
8.2.10 IPMI Submenu
Configures server management settings.
Power Failure Recovery • Always On
• Always Off
• Previous State (at the
time of purchase)
Sets whether to turn the power on or off after a
temporary main power outage due to power
interruption, etc.
Note:
 For UPS scheduled operation, set to [Always
On]. Otherwise, the power may not be turned
on at the specified time.
table: Items on the IPMI Submenu
Item Setting Description
SEL Load Displays the usage of event log space as a percentage.
Clear System Event Log • Disabled (at the time
of purchase)
• Enabled
Sets whether or not to clear the event log.
Event Log Full Mode • Overwrite
(at the time of
purchase)
• Maintain
Sets whether or not to overwrite the event log when
space available for it becomes full.
Note:
 Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
(pg.280) for saving the event log.
BMC Time Sync Enabled (Fixed
parameter)
Synchronizes the internal clock of the Baseboard
Management Controller (BMC) with the system
time.
System Event Log Displays the system event logs. Press the [Enter] key to display the system event
log window. Display previous and subsequent entries using [+] [-] keys.
SDRR Browser Displays sensor information. The SDRR Browser is displayed by pressing [Enter].
table: Items on the Power On/Off Submenu
Item Setting Description
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
IPMI
nn%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
System Event Log
SDRR Browser
LAN Setting
>
>
>

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English