Fujitsu PRIMERGY TX200 S2 User Manual

54
Chapter 2 Checking before OS Installation
2.4 Preparation for Using ServerStart
on a Client Computer
When using the preconfiguration mode for setting installation information in advance
or when creating a driver disk using the FloppyBuilder function, install ServerStart on
the client computer.
● System Requirements for Client Computers
Client computers must satisfy the following requirements.
2.4.1 Installing ServerStart
 If a different version of ServerStart has been installed, uninstall it. The FloppyBuilder function or
installation wizard may not operate properly on a different version.
For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (pg.57).
1 Insert the ServerStart CD-ROM into the client computer.
The [ServerStart Launcher] window appears.
When the [ServerStart Launcher] window does not appear, execute "Launcher.exe" in the CD-
ROM.
2 Click [OK].
The Windows installer starts and the setup window appears.
Hardware
Personal computers operated with Windows NT, Windows XP Professional, or Windows
2000 Professional
(A CD-ROM drive and 10MB or more of free space are required.)
Software Microsoft® Internet Explorer 5.5 or later

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English