Fujitsu PRIMERGY TX200 S2 - Configure Settings in Wizards; Close;Save the Configuration File

79
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart
3.2.2 Configure Settings in Wizards
Click the wizards to set items in the following procedures. For setting procedures, refer to description on
guided mode wizards ("3.1.2 Open/create a Configuration File" (
pg.64) to "3.1.6 Application Wizard"
(
pg.73)).
Exiting a wizard returns the display to the preconfiguration mode window.
3.2.3 Close/save the Configuration File
When settings in all wizards are completed, save the configuration file.
1 Click [Close and save Configuration File].
The [Save ServerStart Configuration File] window appears.
Open/create configuration file
OS installation wizard
Application wizard
Close/save configuration file
Starting OS installation
RAID wizard
Activate ServerStart in the server
Disk wizard