Fujitsu PRIMERGY TX200 S2 User Manual

131
PRIMERGY TX200 S2 User’s Guide
4
Manual OS Installation
 After LAN driver installation, names of the LAN devices are displayed as follows.
■ When a LAN Card is Added
The following window may appear at system startup after addition of a LAN card. Perform the
appropriate procedure according to the displayed window.
• When the "New Hardware Detection Wizard" window appears
Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and subsequent steps
in "Updating LAN Drivers".
• When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or floppy
disk" or "Intel
®
PRO/1000 Disk Driver".
Insert the driver disk created from the ServerStart CD-ROM and install the driver.
 The "Digital signature was not found" message may appear. If it appears, click [Yes] to continue the
operations.
 When the [Overwriting the Files] window appears, normally do not overwrite the files (select [Do not
overwrite all files]).
4.3.3 Latest Drivers
For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
table: LAN device name
LAN cards LAN device name
Onboard LAN (1000BASE-T) Broadcom NetXtreme Gigabit Ethernet
PG-1852 Intel(R) PRO/1000 MT Desktop Adapter
PG-1862 Intel(R) PRO/1000 MT Dual Port Server Adapter
PG-1882 Intel(R) PRO/1000 MF Server Adapter (LX)
PG-1892 Intel(R) PRO/1000 MT Server Adapter

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English