Fujitsu PRIMERGY TX200 S2 User Manual

117
PRIMERGY TX200 S2 User’s Guide
4
Manual OS Installation
3 Click [OK].
The [Initializing ServerStart] window appears and unattended installation will be started.
Depending on the hardware configuration, this process may take a few minutes. When the
process is completed, the [Create a ServerStart Floppy Disk] window appears.
4 Click [or Insert a ServerStart Floppy Disk to Start ServerStart].
The [Welcome to ServerStart] window appears.
5 Eject the ServerStart floppy disk.

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English