Fujitsu PRIMERGY TX200 S2 User Manual

27
PRIMERGY TX200 S2 User’s Guide
1
Overview
n LAN (10/100/1000BASE-T) port ( )
An Unshielded Twisted Pair (UTP) cable is plugged in.
For 1000Mbps connection, a category 5 enhanced cable is required.
For 10Mbps/100Mbps connection, a category 5 or higher cable is required.
The meaning of the LED is shown in the table below.
o Side cover lock
When the side cover is locked, it cannot be opened. We recommend you lock it to prevent
unauthorized access to the inside of the server.
table: Meaning of the LAN Port LED
LED
location
LED status Connection status
Upper LED Lights in amber Connection established at
1000Mbps
Lights in green Connection established at
100Mbps
Off Connection established at 10Mbps
Lower LED Lights in green Link is being established
Blinks in green Data is being transferred
LED

Fujitsu PRIMERGY TX200 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX200 S2
Category	Server
Language	English